Publicidad
Idiomas disponibles
Idiomas disponibles
Cooc
MG Oa
QO oon
hr MOONQYI
PREPARATIONS
BEFORE OPERATION
CASSETTE TAPES
Usable tapes
For playback, use normal (type I), CrOz (type I), and metal (type
IV) tapes.
For recording, use normal (type I) and CrOz (type II) tapes.
The proper bias and equalization to suit the type of tape are
selected automatically.
Tape slack
Take up any slack in the tape with a pencil or similar tool before use.
Slack tape may break or jam in the mechanism. > E§
120-minute or longer tapes
These are extremely thin and easily deformed or damaged. They
are not recommended.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape after recording, with
a screwdriver or other pointed tool.
~ EJ
@ Side A
@ Tab for side A
To record on the tape again, cover the tab openings with cello-
phane tape. (On CrOz tapes, take care not to cover the CrOz tape
detection slot @.) —
DEMO (DEMONSTRATION) MODE
When you first connect the AC cord, the display window demon-
strates the unit's preset functions.
When the power is turned on, the DEMO display is hidden by the
operation display. When the power is turned off, it is restored.
To cancel DEMO mode — Bf)
Press the DEMO button.
To re-enter DEMO mode
Press the DEMO button again.
After a power interruption
The unit enters DEMO mode.
DIRECT PLAY FUNCTIONS
Youcan turn the unit on and start playback immediately by pressing
one of the direct play buttons. Press the TUNER/BAND button to
listen to the tuner, the TAPE/DECK1/2 button to listen tozs tape, or
the CD button or DISC DIRECT PLAY buttons to liste: to discs
loaded in the disc compartment.
NOTE
If the power is on, pressing the CD button or the TAPE(MECK1/2
button selects a source to be played. Press the <4» butb nto start
play.
Publicidad
