Etac Crocodile R82 Manual Del Usuario página 36

General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and ap-
pliances for children and teenagers with special needs. To fully benefit from the options offered by this
product please read this User Guide before use and save it for future reference.
Intended purpose
The product is an assistive device for walking,
intended for children and adults with dis-
abilities.
Indications
The device can be used by children and adults
with disabilities, who experience limitations in
their ability to walk independently. The target
group for the device is based on functional
ability and anthropometry. It is not based on a
specific health condition or age.
The user is the person walking in the device.
The caregiver is the person operating the
device. Never leave the user unattended in
this device. Ensure permanent supervision by
a caregiver.
The use of the device will be discontinued
more times during the day where the user will
be sitting, standing or lying down in another
assistive device or a conventional product.
Contra indications
There are no known contraindications.
Precautions
Special attention should be given to the
considerations about the configuration of the
device and the use of accessories for users
with limitation in their:
• Sensory functions and the sensation of
pain, consider extra checks of the pres-
sure caused by the support provided by
the product and its accessories.
• ability to maintain a standing position, con-
sider using accessories such as back and
side support with a strap or a sling seat.
• ability to maintain the position of their
head, consider using an assistive device
for walking that provide support to the
positioning of the head.
Application areas
The product is for indoor and outdoor use
Enclosed tools
• 2½+3+4+5+6 mm Allen key
Declaration of Conformity
This product conforms to the requirements of
the Medical Devices Regulation (2017/745).
Further, this product conforms to the require-
ments according to:
• EN 12182
• ISO 11199-2
EN
ENGLISH
• ISO 11199-3
• EN 1985
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended
purpose and declaration of conformity
• Using other than original R82 spare parts
and fittings
When combining the device with other prod-
ucts, the combination must not change the
intended purpose of the products or modify
the products in such a way that compliance
with the applicable requirements may be af-
fected. The person / company responsible for
the combination of the products must ensure
that the applicable requirements are fulfilled.
Applicable requirements examples:
• Material safety (biocompatibility, flam-
mability), mechanical safety (stability,
squeezing hazards, inter connection),
electrical safety
Disposal
When a product reaches the end of its lifetime,
it should be separated by material type so
that the parts can be recycled or disposed of
properly. If required, please contact your local
dealer for a precise description of each mate-
rial. Please contact your local authorities to be
informed of the options available for recycling
in an environmentally-friendly way.
Accessories and spare parts
The products from R82 can be sup-
plied with a variety of accessories which
comply with the needs of the individual
user. Spare parts can be ordered on
request. Find the specific accessories on
our website or contact your local dealer for
further information.
R82 Warranty
www.etac.com/support
Presales information and instructions
Presales information and instructions are
available at www.etac.com, under your prod-
uct, in the documents section.
36
etac.com