Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
6. OPERATING INSTRUCTIONS
Wait for about 3 hours after power-up before performing any high accuracy weighing operation.
It is advisable to leave the balance permanently on (connected to the AC line).
It is possible to switch off only the display with the ON/OFF key, this allows a quick recovery when the
balance is switched on.
7. KEYBOARD OPERATION
The keyboard has four control keys: PRINT, MODE, TARE, ON-OFF.
Every key has a specific function, while keys MODE, TARE and ON-OFF also acivate a second function.
If the keys are activated for less than 1 second the first function is activated, when pressed for more the
second function will be active.
The table below shows the operation capabilities.
KEY
NAME
FOR LESS THAN 1 SECOND
On/Off
Display illumination on/off
Mode
See additional functions
Tare
Print
KEY
NAME
FOR LESS THAN 1 SECOND
On/Off
Mode
Scroll available items
Tare
Exit current selection
Print
8. TARE
After a container is placed on the pan, push the TARE key to zero the reading.
The balance has a tare capacity up to its total measuring range.
Place the sample to be weighed in the container.
The display shows the sample net weight.
It is possible to use the tare key again and again after adding several samples, up to the maximum capacity
of the balance, indicated by a bargraph on the left side of the LCD display.
Page 20 of 42
Normal use
KEY ACTIVATED
Tare function
Print function
Main & configuration menu
KEY ACTIVATED
Confirm selection
No function
KEY ACTIVATED
FOR MORE THAN 1 SECOND
Balance on/off
See additional functions
Tare function
KEY ACTIVATED
FOR MORE THAN 1 SECOND
INSTRUCTION MANUAL - 60.50.638 3
CRYSTAL 1000
No function
No function
No function
No function
No function
nd
edition – December 2014
Publicidad
