Descargar Imprimir esta página

Furman PST-10D Manual página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

by Furman.
CONNECTED EQUIPMENT WARRANTY: Furman Sound's Connected Equipment
Warranty covers equipment that is damaged by transient voltage (an "Occurrence")
while properly connected through the Furman PST-10D to a properly wired AC power
line with a protective ground in an indoor location. Furman's Connected Equipment
Warranty is limited to the amount of the deductible on the Purchaser's personal
property insurance policy up to $500.00. In order to make a claim for this Connected
Equipment Warranty, the Purchaser must forward a copy of his/her personal property
insurance claim for the damaged equipment to Furman and complete the Furman
Connected Equipment Warranty claim form (call Furman at (707) 763-1010 to obtain
the form). Furman reserves the right to review the damaged Furman product, the
damaged connected equipment, and the site where the damage occurred. All cost
of shipping damaged equipment to Furman for inspection shall be borne solely by the
Purchaser. Damaged equipment must remain available for inspection until the claim
is finalized. The Connected Equipment Warranty is also in effect for a period of three
years unless the Purchaser does not complete the warranty registration within fifteen
days from date of purchase, at which time, the Connected Equipment Warranty period
is also reduced to one year from the date of purchase.
All warranties contained herein are null and void if: the Furman Surge Protector in
use during the occurrence is not provided to Furman for inspection upon Furman's
request at the sole expense of the Purchaser, Furman determines that the Furman
Surge Protector has been opened, improperly installed, altered in any way or tampered
with, Furman determines that the damage did not result from the Occurrence or that
no Occurrence in fact took place or Furman determines that the connected equipment
was not used under normal operating conditions or in accordance with Manufacturer's
instructions for the connected equipment. All Furman Surge Protectors must be
plugged directly into a properly wired AC power line with a protective ground and must
not be "daisy-chained" together in serial fashion with other power strips, UPS's, other
surge protectors, three-to-two-prong adapters, or extension cords. Any such installation
0

Publicidad

loading