the unit's bottom panel. A standard No. 6 pan head screw can be
used in the same way a picture is hung from a wall. Simply measure
the centers on the bottom of your Power Station. This will be the
distance from the two mounting hole drilled into your wall, rack or
cabinet surface. Once the screw is fastened flush with the surface,
back it out approximately ½" . The screw head should push through
the crossed cutout on the bottom surface of the Power Station. Next,
simply allow the Power Station to move down and seat into the end
of its oval cut-out. Adjust the pan head screw if necessary.
Warranty
Furman Sound, LLC warrants to the original purchaser of this product, the Furman PST-
10D, that the product will be free from defects in material and workmanship for a period
of three years from the date of purchase. The purchaser of the product is allowed fifteen
days from the date of purchase to complete warranty registration by mail or on-line at
the Furman website. If the purchaser fails to complete the aforementioned registration,
the warranty period will be reduced to one year from the date of purchase.
If the product does not conform to this Limited Warranty during the warranty period (as
herein above specified), purchaser shall notify Furman in writing of the claimed defects.
If the defects are of such type and nature as to be covered by this warranty, Furman
shall authorize the purchaser to return the product to the Furman factory or to an
authorized Furman repair location. Warranty claims should be accompanied by a copy
of the original purchase invoice showing the purchase date; this is not necessary if the
Warranty Registration was completed either by mailing in the completed warranty card
or by registering on-line at the Furman website. Shipping charges to the Furman factory
or to an authorized repair location must be prepaid by the purchaser of the product.
Furman shall, at its own expense, furnish a replacement product or, at Furman's option,
repair the defective product. Return shipping charges back to purchaser will be paid