Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL ABS
EN
2. SUMMARIZE
ABS
UNIT KEY (Move Key)
A: Select Unit.
B: Status 1: Move the flash on digit to left.
C: Status 2: When all digit flash, press UNIT KEY and let single digit flash, enter into status
1. Press UNIT KEY again enter into status 2. It is circle.
D: Status 3: When set parameter, press UNIT KEY can minus one. (At this moment)
M MENU KEY
A: Press and Hold MENU KEY for 5 seconds will enter into system setting menu.
B: Press and Hold MENU KEY for 1 second will save and quit system setting menu.
C: Short press MENU KEY to alternately display system menu, but if only one parameter in this level, short press
MENU KEY will return to previous menu.
CAL KEY < Enter Key)
When normal weighing, short press CAL KEY will zeroing.
B: Press and hold CAL KEY for 5 seconds will enter into calibration.
C: Enter into submenu.
D: At the bottom menu, press CAL KEY will confirm the present status and return to: (1) The previous menu
(2) Enter into a weighing function (such as density, dynamic)
E: Under COD STATUS ( Engineer Parameter Setting Status) Input different code will enter into correspond para-
meter menu.
PRINT KEY (Cycle Key)
When manual printing or communication available, press PRINT KEY will send weighing data to printer or other
equipment.
B: When one digit flash , press PRINT KEY will plus one.
C: Cycle to next parameter when display flash.
TARE KEY (Return Key)
A: Tare.
B: Return to the previous menu without save.
C: Press and hold PRINT KEY for 1 second will quit from a weighing function and retorn to normal weight mode.
(Such as density, dynamic)
73
Note: The buzzer sound different when long press or short press the key.
Publicidad
