Kids II Cradle & Sway InGenuity Serie Instrucciones De Montaje página 33

Utilización del módulo de control de la mecedora
Utilisation du module de commande de la balançoire
Power Switch
Interruptor de Encendido
Interrupteur de mise en marche
Swing Timer Select Button and Indicator
Botón e indicador de selección de
temporizador de la mecedora
Sélecteur et indicateur de minuterie de
la balançoire
Low Battery Indicator (red)
Indicador de batería baja (rojo)
Indicateur de niveau de piles faible (rouge)
Speed Selector Button and Indicator
Botón e indicador de selección de velocidad
Sélecteur et indicateur de vitesse
Slide the Power Switch to power the Swing Control Module.
EN
The Speed Selector function provides six speed settings and OFF. The LEDs
operate sequentially and in bar graph mode. To start the swing function, press the
button until the flashing LED bar graph displays the desired setting. Then gently
push the seat (within 15 seconds) to activate the swing motion. After five
seconds, a single LED will indicate the selected speed.
When you change the speed setting during swing motion, the LED bar graph will
flash for five seconds during the speed adjustment. When the swing timer expires,
the swing stops and the Speed Selector and Timer LEDs turn OFF.
Use the Swing Timer Select function to turn OFF the swing automatically. Press
the button to sequence to the desired timer setting of 30, 45, or 60 minutes. The
three LEDs above the button indicate the selected time period. If you do not select
a timer setting (all LEDs are OFF), the unit uses a default time of 90 minutes for
auto-shutoff. To use the swing function after auto-shutoff, either press the Swing
Timer Select Button or the Speed Selector Button.
Press the Music Button to begin music playback. Press again as needed to select
the desired song. Auto-shutoff occurs after about 24 minutes.
Press the Nature Sounds Button to begin nature sound playback. Press again as
needed to select the desired sound. Auto-shutoff occurs after about 15 minutes.
Slide the Volume Control Switch as needed to select either OFF, Low, or High
volume for music and nature sounds.
Using the Swing Control Module
Volume Control Switch
Interruptor de Control de Volumen
Interrupteur de commande du volume
Nature Sounds Button
Botón de Sonidos de la Naturaleza
Bouton Sons de la nature
– 31 –
Music Button
Botón de Música
Bouton musique