Descargar Imprimir esta página

GE PT920 Manual Del Propietário página 41

Horno empotrado a conveccion electrico
Ocultar thumbs Ver también para PT920:

Publicidad

Idiomas disponibles

Idiomas disponibles

GEPpp/iances.com
Standard Racks
The standard racks may be cleaned by
hand widl an abrasive cleaner or steel
wool. Aider cleaning, rinse the racks with
clean wamr and &T with a clean cloth.
They may also remain in the oven
during the self:cleaning cycle without
being damaged.
If dley become
hard to slide, wipe their
side edges and the oven rack supports
with cooking
oil after cleaning
them by
hand
or in the oven. This will help
maintain
the ease of sliding the racks
in and out of the oven.
Extension Rack
Porcelain enamel surfaces of the
extension rack may be cleaned by hand
with an abrasive cleaner or steel wool.
Do notuse a steel woolpad toclean
stainless steel surfaces ofthe extension
rack;it will scratch thesurface. See
Stainless SteelSurfaces in this Careand
cleaning section.
NOTE:Donot cleanin a dishwasher
The rack may also remain
in tlle oven
during
tile self:cleaning
cycle widlout
being
damaged.
ff the rackbecomeshardto removeor
replace, wipe tlle oven rack supports
wkh cooking oil. Do not wipe cooking oil
on theslides.
If die rack becomes
difficult
to slide or if
the release levers become
difficult to use,
the rack may need
to be lubricated
using
the Graphim
Lubrication
shipped
wkh
your oven. To order additional
Graphim
Lubrication,
ca/1 our National
Parts
Cenmr at
800.626.2002
and refe.rence
WB02T10303.
Tolubricate theslides:
NOTE: Onnot spray extension rackwith cooking
sprayor otherlubricant s prays.
77 Remove tile rack f_om the oven°
See Extension R ack in the Usingtheoven
section°
[_
Fully extend the rack on a ruble
or countertop.
Newspaper may be
placed underneath
the rack fbr easy
cleanup.
_]
If.there is deb,Js in tile slide tracks,
wLpeit away using a paper towel.
NOTE: Anygraphitelubricant w ipedaway
mustbe replaced.
F
o
....
[_
Shake the graphite lubricant before
opening it. Starting with the left
slide mechanism of the rock, place
fbur (4) small drops of lubricant
on the two (2) bottom tracks of the
slide close to the bearing carriers.
Rackright-side-up
Repeat for the right slide
mechanism of the rack.
Rackright-side-up
Open and close tlle rack several
_]
times to distribute tile lubricant.
[_] Replace the cap on the lubricant
and shake it again. Turnthe rack over
andrepeatsteps 3, 4,5 and 6.
[_
Close the rack, mrn rack right-side-
up and place in tile oven. See
Extension R ack in tile Usingtheoven
section°
Tolubricatethe releaselevers:
Shake lubricant and apply to the moving
parts of the release leve,_ and paddle
4 l
mechanisms.

Publicidad

loading

Este manual también es adecuado para:

Pt960