GE PT920 Manual Del Propietário página 7

GEPpp/iances.com
Extension Rack
When placing and removing cool(ware, TO
replace the rack:
ah,vays pull the rack out by its upper
front rail to its flflly open position.
[77 Firmly grasp both sides of the rack
/VOTE: D o not extendthe rackquickly Food fiame and the sliding rack.
mayslide off the front of the rack. [_ Place the curved end of the rack
L_b;_,
..... _:_l 1
(stol>locks) onto the oven supports,
-
tiltupthef o,,tofthe,.ck.,,d
_1_.[: push it in asflu asit will go.
FullyOpenPosition / ::::-__ _ }
Toremovethe rack:
[_ Make sure the rack is pushed all the i
way into the oven.
Pull both release levers toward the
flont of the rack, hold them and
slide tile rack toward you to the
bump (stop position)
on the rack
support.
-4,CAUT/ON: N ever use the rack
whenits frameis not fully insertedin the oven
and lockedinto position.
WB Whentherackisproperly installed and locked
intoposition,thelocking sidepaddles on the
rackframewill click-lock intoplaceon theoven
supports, f f thesidepaddlesdidnot click-lock
intoposition, r epeatthestepsaboveandmake
surethesidepaddles havebeencorrectly
cleaned andlubricated. SeeExtension f lack
in theCare andcleaning section.
Donotplacetheextension rackin thehighest
positionin theoven.
%
Firmly grasp both sides of the rack
flame and the sliding rack, tilt the
flont end up and pull it out.
Grasp here
NOTE:Whenhandling theextensionrack,
do not allow the slidingportion to fall open.
Thiscan damagethe slides.
7