Normatec Go Instrucciones De Uso página 11

WARNING!
• Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches)
to any part of the Normatec Go, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.
• The Normatec Go should not be used adjacent to or stacked with other
equipment. If adjacent or stacked use is necessary, the NormatecGo
should be observed to verify normal operation. If operation is not normal,
the Normatec Go or the other equipment should be moved.
• Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this equipment could result in increased
electromagnetic emissions or decreased electromagnetic immunity of
this equipment and result in improper operation.
• Avoid exposure to known sources of EMI (electromagnetic interference)
such as diathermy, lithotripsy, electrocautery, RFID (Radio Frequency
Identification), and electromagnetic security systems such as anti-theft/
electronic article surveillance systems, metal detectors. Note that the
presence of RFID devices may not be obvious. If such interference is
suspected, reposition the equipment, if possible, to maximize distances.
ELECTROMAGNETIC EMISSIONS
This equipment is intended for use in the electromagnetic environment of clinics,
hospitals, athlete training, or home environments. The user of this equipment should
assure that it is used in such an environment.
Emissions
RF emissions
(CISPR 11)
CISPR emissions
classification
Harmonic emissions
(IEC 61000-3-2)
Voltage fluctuations/
flicker (IEC 61000-3-3)
ELECTROMAGNETIC IMMUNITY
During the immunity testing described below the Normatec Go continued
to provide therapy normally. This equipment is intended for use in the
electromagnetic environment specified below. The user of this equipment should
assure that it is used in such an environment.
Compliance
According To
Group 1
Class B
Class A
Complies
Electromagnetic Environment
The equipment uses RF energy only
for its internal function. Therefore, its
RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment.
The equipment is suitable for use
in all establishments, including
domestic establishments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.