Normatec Go Instrucciones De Uso página 7

USING HYPERSYNC
™
Your Normatec Go devices arrive paired, which means they will inflate and deflate on
the same cycle. To unpair devices, press and hold the Start / Stop button on either
device until the device screen reads "Unpaired!" and the white pairing indicator light
is no longer illuminated. To pair your devices, turn on both devices by pressing and
holding the power (ON/OFF) button. Then press and hold Start / Stop button on either
control unit until the display screen says "Pairing!" Finally, press and hold the Start /
Stop button on the other device until both devices say "Pairing!" and the white pairing
indicator light is illuminated.
CONNECT TO THE HYPERICE APP
Download the Hyperice App from the App Store or the Google Play Store. To connect
your device to the Hyperice App via Bluetooth® make sure that your device is turned
on, Bluetooth® is turned on in your phone, and your device is within range of your
phone. The Bluetooth LED on the pod will pulse blue, which means it is waiting to pair.
If prompted, tap "Scan for Devices." Select your device when it pops up on the screen.
Once you pair your Normatec Go, HyperSmart™ will allow you to automatically start
your session and control the pressure level and time from within the Hyperice App.
CYBERSECURITY
It is recommended to configure the Hyperice App for automatic updates to ensure
cybersecurity. It is also recommended to keep your Operating System up to date and
to configure your Operating System for automatic updates.
ADJUST THE PRESSURE LEVEL
Adjust the pressure level of the session by pressing the pressure level adjustment
button on the top left of the control panel. Pressure level 1 is the gentlest setting. The
massage becomes more intense as the pressure level is increased. Level can be
adjusted while the session is running.
ADJUST THE SESSION TIME
Adjust the session time by pressing the time adjustment button. The session time
can be set to 15, 30, 45, and 60 minutes. Time can be adjusted while the session is
running. Press the time adjustment buttons to cycle through the session time options
to add or subtract time from the session.
START THE SESSION
To start the session, press the Start/Stop button.
PATENTED NORMATEC PULSE MASSAGE PATTERN
The patented Normatec Go massage pattern will begin by compressing your upper
ankle. Similar to the kneading and stroking performed during a massage, each zone
of the wrap will first compress in a pulsing manner and then hold as the compression
pattern works its way up your lower limb. When the top zone completes its massage,
there will be a brief rest period and then the cycle will begin again. This will repeat
until the session time runs out.
The zones on the wrap are numbered in ascending order from distal zone to
proximal zone. Zone 1 corresponds to the upper ankle, Zone 2 corresponds to the
lower calf, and Zone 3 is the upper calf.