Publicidad
Idiomas disponibles
Idiomas disponibles
STOP OR PAUSE THE SESSION
To stop the session at any time, press the start/stop button. This will pause the
session. To restart your paused session, press the start/stop button again. If you are
done using the system, remove the wraps from your limbs, and turn off the control
unit by pressing the power button.
FINISH THE SESSION
The session will continue massaging until time runs out and the display reads
"Finishing Cycle". The system will continue until the current cycle is finished. When
the session is complete, remove the wraps from your limbs, and turn off the control
unit by pressing the power button.
TURN OFF THE CONTROL UNIT
To turn off the system, press the power button and confirm that the Battery Status
Indicators and Display are off.
CLEANING THE SYSTEM
• Wipe down the inside and out with a damp, clean cloth.
• Dry thoroughly with a clean cloth.
• Do not machine wash or dry.
• Do not dry clean.
MAINTAINING THE SYSTEM
The system requires no routine maintenance or service except for the care in this section.
STORING THE SYSTEM
Store the system in a clean, dry location.
REPLACEMENT PARTS
Please call customer service at +1.949.565.4994 or visit our website at hyperice.com
for information regarding available replacement parts and accessories.
TECHNICAL INFORMATION
Do not attempt to take apart the system. The system has no user-serviceable parts.
There are no user-replaceable fuses.
BLUETOOTH
WIRELESS TECHNOLOGY
®
The Bluetooth
word mark and logos are owned by Bluetooth
®
use of such marks by Hyperice is under license. In the unlikely event of loss of a
stable Bluetooth
®
automatically. The Normatec Go control unit is completely autonomous, and will
continue operating normally, even during a loss of connectivity. If this control unit does
cause interference, which can be determined by turning the control unit off and on,
the user is encouraged to try to correct the interference by reorienting or relocating
the control unit, increasing the separation between equipment and the control unit, or
connecting the control unit to a different outlet on a circuit if it is plugged in.
The Normatec Go control unit uses Bluetooth 5.0 wireless technology with the
following radio specifications:
connection, the system will attempt to re-establish its connection
SIG, Inc., and any
®
Publicidad
