STERWINS UP20 Instrucciones De Montaje, Utilización Y Mantenimiento página 207

D) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
E) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
2.6 SERVICE
A) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
2.7 ADDITIONNAL CHAINSAW SAFETY WARNINGS
A) Keep all parts of the body away from the
saw chain when the chainsaw is operating.
Before you start the chainsaw, make sure
the saw chain is not contacting anything.
A moment of inattention while operating
chainsaw may cause entanglement of your
clothing or body with the saw chain.
B) Always hold the chainsaw with your right
hand on the rear handle and your left hand
on the front handle. Holding the chainsaw
with a reversed hand configuration increases
the risk of personal injury and should never
be done.
C) Hold the chainsaw by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting
a "live" wire may make exposed metal parts
of the chainsaw "live'" and could give the
operator an electric shock.
D) Wear eye protection. Further protective
equipment for hearing, head, hands, legs and
feet is recommended. Adequate protective
equipment will reduce personal injury from
flying debris or accidental contact with the
saw chain.
E) Always keep proper footing and operate
the chainsaw only when standing on fixed,
secure and level surface. Slippery or unstable
surfaces may cause a loss of balance or
control of the chainsaw.
F) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 130 °C may cause
explosion.
G) Follow all charging instructions and do
not charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of
fire.
B) Never service damaged battery packs.
Service of battery packs should only
beperformed by the manufacturer or
authorized service providers.
F) When cutting a limb that is under tension,
be alert for spring back. When the tension in
the wood fibres is released, the spring loaded
limb may strike the operator and/or throw the
chainsaw out of control.
G) Use extreme caution when cutting brush
and saplings. The slender material may catch
the saw chain and be whipped toward you or
pull you off balance.
H) Carry the chainsaw by the front handle
with the chainsaw switched off and away
from your body. When transporting or storing
the chainsaw, always fit the guide bar cover.
Proper handling of the chainsaw will reduce
the likelihood of accidental contact with the
moving saw chain.
I) Follow instructions for lubricating, chain
tensioning and changing the bar and chain.
Improperly tensioned or lubricated chain
may either break or increase the chance for
kickback.
J) Cut wood only. Do not use chainsaw for
purposes not intended. For example: do not
use chainsaw for cutting metal, plastic,
masonry or non-wood building materials. Use
of the chainsaw for operations different than
intended could result in a hazardous situation.
K) Do not attempt to fell a tree until you have
an understanding of the risks and how to
avoid them. Serious injury could occur to the
operator or bystanders while felling a tree.
207
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN