STERWINS UP20 Instrucciones De Montaje, Utilización Y Mantenimiento página 211

3. TECHNICAL DATA
Maker Model
Nominal voltage (V)
Max cutting length (cm)
Guide bar reference
Chain reference
Chain size (inch)
Chain pitch (inch)
Chain Gauge (mm)
Guide Length (cm)
Drive Links
Output rotative speed (min
Chain speed (m/s)
Oil tank capacity (ml)
Net weight (kg)
Gross weight (kg)
Sound pressure level L
Uncertainty K
Measured sound power level L
Uncertainty K
Guaranteed sound power level LWA
(according to 2000/14/EC amended by
2005/88/EC)(dB)
Vibration(m/s²)
Uncertainty K (m/s²)
The sound values have been determined according to noise test code given in EN13683, using
the basic standards EN ISO 3744 and EN ISO 11094. The sound intensity levels for the operator
may exceed 93dB(A) and ear protection measures are necessary. The declared vibration total
value(s) and the declared noise emission value(s) have been measured in accordance with a
standard test method and may be used for comparing one tool with another. The declared
vibration total value(s) and the declared noise emission value(s) may also be used in a
preliminary assessment of exposure.
Warning: The vibration and noise emissions during actual use of the power tool can differ from
the declared values depending on the ways in which the tool is used especially what kind of
workpiece is processed;
Warning: The emissions need to identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
)
-1
(dB (A))
pA
(dB (A))
pA
(dB (A))
WA
(dB (A))
WA
211
20VPS2-22.1
20 V
22
104MLEA041 (Oregon)
90PX040X (Oregon)
10
3/8 LP
1.1
25.4
6
5200
10
90
2.2
3.4
86
3
93.7
3
98
< 2.5
1.5
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN