SYSTEM ASPECTS
STANDBY
¢ Switching your recorder to standby can also be done via the
remote control.
- The recorder will be switched to standby.
All light indicators will be switched off with the exception of
the standby indicator.
TIMER
By connecting your DCC deck to a timer, you can start and
stop playback or recording automatically.
e Set the timer and switch on the DCC deck.
¢ Prepare the deck for playback or recording (see under
chapter PLAYBACK or RECORDING).
e At the time set on the timer, the deck will start playback or
recording.
e When you are not using the timer, set the TIMER switch to
the OFF position.
GENERAL REMARKS
© Your DCC.Unit might influence the quality of a broadcast
signal when the radio antenna is located close to the DCC
player.
MAINTENANCE
© Do not leave the unit for any length of time in direct sunlight
or other places where high temperatures can occur, such as
in the vicinity of heating apparatus.
* Do not expose the equipment to humidity or rain.
e Achamois leather cloth slightly moistened with water is
sufficient for cleaning the deck.
¢ Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives.
WARNING
ONLY USE SPECIAL DCC CLEANING CASSETTES
FOR YOUR DCC UNIT !
DO NOT USE DEMAGNITIZE CASSETTES !
7
If the cabinet becomes heavily soiled:
— wipe the cabinet with the damp cloth;
— dry the cabinet by wiping it with a dry cloth.
REPAIRS