Marantz DD-82 Guia Del Usuario página 7

CONNECTIONS:
REMOTE CONTROL:
nae *'JMPORTANT! eet
When the recorder! is incorporated in.a HiFi system with —
BUS connection; this: switch:should eet be in the EXT:
position...
:
;
When the. recorc
not incorporated | in a. Higj's s te
saith
BUS connection, the switch. should be.in the INT. position.
REMOTE D-BUS CONNECTIONS
TUNER
[ ©«
Bou
AMPLIFIER
DD-82/DD-92
CD PLAYER
WARNING ST
Do not connect the set to the mains until all other:.
connections have been made and the ains vol
(indicated o on the type plate) has been checkec A
MAINS SUPPLY
@® Voltage selector 110/120/220/240 V — for selecting the
mains voltage (not on all versions)
@® Mains lead Socket
* Check that the mains voltage as shown on the type plate
corresponds to your local mains supply. If it does not,
consult your dealer or service organisation.
¢ If your unit has a voltage selector, make sure only to change
the voltage in the POWER OFF position.
* Insert the plug of the mains lead into the wall socket.
¢ If your amplifier has AC MAINS OUTLETS, you are advised
to insert the plug of the mains lead into these outlets.
The mains supply is now connected.
* To disconnect the set from the mains completely, remove
the mains plug from the wall socket or from the AC MAINS
OUTLETS of your amplifier.
After having made all the necessary connections (some may
not be applicable for your set-up), your system is ready for use.
In the next chapters we will describe how to operate it.