Publicidad
Viewing/Changing the Shaker Speed
You can view/change the speed value with the bath running or not. From the home screen press the soft key below
2
0
RPM
Changing the Set Point
When operating without a lid, limit the maximum set point to 60°C.
You can change the set point with the bath running or not. From the home screen press either arrow key to display:
29.9°C
50.0°C
x
Selecting a Preset
T1
35.0°C
T2 37.0°C
T3 50.0°C
T4 55.0°C
Note After a 30 second delay if neither key is pressed the display returns to the home screen, any change is not saved.
Press, and hold, the arrow keys to bring up the desired value. The values are 0 and 30 to
200. Once the desired value is displayed press
and return to the home screen.
Press, and hold, the arrow keys to bring up the desired set point value. The range is 5°C
to 100°C. Once the desired value is displayed, in this case 50.0°C, press the soft key
below
change. The display returns to the home screen.
Note After a 30 second delay if neither key is pressed the display returns to the home
screen, any change is not saved.
You can select a preset with the bath running or not.
30 RPM
50 RPM
From the home screen press
70 RPM
90 RPM
Use the arrow keys to select the desired preset. Once the desired preset is highlighted
press the soft key below
to save the change or press the soft key below
:
to save the change and return to the home screen.
to display:
or
to save the change
x
to not save the
Page 2 of 2
Publicidad
