Connecting To A Wireless Network; Reserving An Ip Address For Your Statim - SciCan STATIM 2000 G4 Manual Del Operador

3 Setting up your STATIM
NOTE: Use QR code if connecting to a mobile device.
NOTE: Connection time will vary depending on your network speed, and making an initial connection can
take longer.

3.21 Connecting to a Wireless Network

The STATIM G4 can be configured for wireless use by connecting the Ethernet port to an external
wireless bridge / access point. SciCan currently recommends the use of the D-Link
®
Xtreme N Duo Wireless Bridge. Contact your network administrator to learn more about setting up
a wireless bridge.

3.22 Reserving an IP Address for your STATIM

When your STATIM is connected to a router on your network, it is assigned a unique IP address. If
the connection between your STATIM and the router is lost (e.g. power failure, STATIM or router was
restarted), the re-established connection may be a different IP address. This may cause any previously
saved bookmarks or other saved links to become invalid.
To set a 'permanent' IP address (also known as establishing a DHCP/IP/Address Reservation), follow
these steps:
1. Select the Network icon From the STATIM G4 touchscreen and write down the numbers found for the
GATE (Router Local IP). Enter this GATE number in the address bar of your web browser to access
your router settings. (NOTE: You will need your network password to change the settings.)
mm/dd/yyyy hh:mm:ss
SELECT A CYCLE
NOTE: Accessing this screen will vary for each router, please consult your router's User Manual or
contact your network administrator for more detailed instructions. SciCan currently recommends D-Link
DIR-615 Wireless N router.
2. Use the 'DHCP/IP/Address Reservation' function to assign your STATIM a 'permanent' IP address.
(NOTE: Each manufacturer may use different nomenclature; this setting may be called: HCP
Reservation, IP Reservation, or Address Reservation.)
3. You will have to select the appropriate device to apply this setting. Your unit's default name will be:
'statim_###'.
IMPORTANT: Please contact your network administrator for more detailed instructions.
Page 19
®
DAP-1522