SciCan STATIM 2000 G4 Manual Del Operador página 46

9 Maintaining your STATIM
Cassette
Biological Filter
Solenoid Valve
Pump
Check Valve
Water Reservoir
Calibration
Technician
• Check the tray, lid and seal for damage. Replace if necessary.
• Inspect the biological filter for moisture.
• Inspect the valve and clean if dirty. Replace the plunger if defective.
• Clean the filters, replace if dirty.
• Remove the exhaust tube from the back of the unit during the air drying
phase. Check for air coming from the fitting.
• Remove the air compressor tube from the check valve inlet while running
a cycle. Make sure no steam is leaking from the valve. Replace if there are
any leaks.
• Check the reservoir for dirt. Clean and rinse with steam process distilled
water if necessary.
• Calibrate the unit.
Page 46