Storing And Retrieving Cycle Information; Retrieving Cycle Information Using The Touchscreen; Retrieving Cycle Information Using The Usb Data Backup - SciCan STATIM 2000 G4 Manual Del Operador

6 Storing and Retrieving Cycle Information

The STATIM G4 has an internal Data Logger capable of storing all cycle data on every cycle, whether
successful or incomplete, for the lifetime of the unit. You can access this information through the
touchscreen, through the web portal, using a USB storage device or by attaching a printer.

6.1 Retrieving Cycle Information Using the Touchscreen

1. From the main menu, press
2. The unit will record the last five successful cycles and the last five incomplete cycles. If you select a
cycle from the list, it will display cycle information in a format similar to how it would be printed.
3. Use the arrow keys to scroll through and read.
NOTE: Regardless of whether you have a USB storage device attached to the unit or not, you can always
see the last five successful cycles and the last five incomplete cycles. Use the STATIM G4 web portal to
access all the cycle information stored on your STATIM from your computer. To connect your STATIM to
a network consult the separate manual titled STATIM 2000/5000 G4 – Setting Up and Using Your Web
Portal.
mm/dd/yyyy
SELECT A CYCLE
6.2 Retrieving Cycle Information Using the USB Data Back Up
The USB storage device can be used to transfer cycle information stored in the unit to a computer. Best
practice suggests this should be done once a week. To transfer data using the USB port, follow these
steps:
1. Plug the USB storage device into the USB port.
2. The STATIM keeps track of what data has already been transferred to the USB storage device and will
automatically load only new data.
3. When the activity light on the provided USB storage device stops blinking or the USB icon on the
LCD turns from a flashing green to a solid grey, remove the USB storage device and transfer the
information to your computer.
NOTE: If you select the USB storage device icon from the main menu, you will only be able to view the
last five complete cycles and the last five incomplete cycles. To view all the cycles stored on the USB
storage device, you must use your computer.
.
hh:mm:ss
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Page 37