Edirol UR-80 Manual Del Usuario página 19

3.
Track Status buttons (TRACK STATUS/HQ PART)..............................................
You can assign MIDI messages to each of these eight buttons. You can also assign MIDI messages
to the LED of each button, and turn the LEDs on/off from your sequencer software.
To each button and LED you can assign four different messages; one for each state of the Select
button (off, green, red, orange). This means that you can assign a total of 32 MIDI messages to the
Track Status buttons, and 32 MIDI messages to the LEDs.
Typically, you will use these buttons to switch the track status (e.g., mute, solo) on your sequencer
software.
4.
Select button (SELECT)
This button switches the MIDI messages that are assigned to the Track Status buttons and their
LEDs. By pressing the Select button you can cycle through these choices: off → green → red
→ orange.
3
Names of Things and What They Do
4
Assignable
19