Controlling The Tempo Of The Song; Midi Remote Mapping Settings - Edirol UR-80 Manual Del Usuario

Controlling your software

Controlling the tempo of the song

The UR-80 lets you use the time dial and cursor buttons to control the tempo of the song.
If you want to control the song tempo from the UR-80, you will need to enable MIDI Clock Sync
in Reason.
* You must first turn the UR-80's timing clock transmission on. To switch timing clock transmission on/off,
press [SHIFT] + V-LINK.
Enabling MIDI Clock Sync
You can enable MIDI Clock Sync in either of the following two ways.
• In the Options menu, choose MIDI Clock Sync to add a check mark
to it.
• Turn on the reason transport MIDI SYNC ENABLE button.
fig.reason-sync_50
Operating reason transport
If MIDI Clock Sync is enabled, Play/Stop operations will be as follows.
* You cannot use Rewind or Forward while MIDI Clock Sync is enabled.
UR-80 controller
UR-80 controller
[SHIFT]+
[SHIFT]+

MIDI Remote Mapping settings

General-purpose MIDI control messages will be assigned to the UR-80's function buttons and
TRACK GROUP button.
You can assign these controllers to the desired parameters of Reason.
1.
In the Options menu, choose Edit MIDI Remote Mapping to enable it.
2.
When you select a Reason module, a green arrow will be displayed for assignable controllers. Choose
a controller.
3.
The MIDI Remote dialog box will appear; check "Learn from MIDI Input".
4.
Press the TRACK GROUP button or function button that you want to correspond with the selected
controller.
5.
Click [OK] in the MIDI Remote dialog box.
6.
Repeat steps 2–5.
7.
When you have finished making settings, choose Edit MIDI Remote Mapping from the Options menu to
disable it.
8.
In the Options menu, verify that Enable MIDI Remote Mapping is checked.
If it is not checked, select the menu item to enable it.
52
→
reason transport
Stop
Play