Eldom copp BL77N Instrucciones De Uso página 7

General description
1. First speed switch
2. Second speed switch
3. Motor unit
4. Drive shaft
4
Technical details
- Rated power: 280W
- Mains supply: 220-240V ~ 50Hz
- Brief operation without interruption - 30 seconds
- Time of the interruption before switching on again – 5 minutes
Operation overview
B e f o r e u s i n g t h e b l e n d e r f o r t h e f i r s t t i m e p l e a s e
disassemble the drive shaft (4), wash it carefully and
d r y . I t s h o u l d b e w a s h e d b y h a n d w i t h r e g u l a r
dishwashing liquid. Never immerse the whole blender in
water. The only washable part is the drive shaft with
metal blade. The mode of assembling the device has
been illustrated on the photography 2. To begin the work
press and hold the first (1) or second (2) speed switch.
The blender is working as long as one of the switches is
pressed. By pressing second switch (2) the greater working
speed of the blade is achieve.
It is recommended to read carefully the safety instructions specified below.
Do not extend the recommended operation time of the blender. Such extensions and lack of
interruptions can cause serious and irreversible damage of the motor unit.
In case of blocking pull the plug of the socket before cleaning.
Instruction manual
Hand blender BL77N
3
7
2
1
phot. 1
phot. 2