Waeco AirCon Service Center Instrucciones De Uso página 102

Service tasks
When you replace an old WAECO flash memory card with a new one,
the individual device data (such as company information and counters)
remain in place.
The old flash memory card is no longer required and can be disposed of in
the appropriate manner.
Switch off the device before opening it and pull out the mains plug.
1. Undo the screws (D) on the control panel and lift it up.
2. Open the fastening of the WAECO flash memory card and pull out the
card (L).
3. Put in a new WAECO flash memory card and fasten it.
4. Lower the control panel and screw it down.
5. Close the control panel and connect in the power plug.
6. Switch on the device and follow the instructions on the display.
102
D
L
D
AirConServiceCenter