Waeco AirCon Service Center Instrucciones De Uso página 80

Operation
11. Enter the correct user name then press ENTER to confirm:
The user is created and the menu changes again to the user selection.
You can now create another user or exit the menu by pressing "STOP".
7.2.2 Entering user codes
When you switch on the air conditioning service station the device data is
shown in the display. If a user code has been created, the same code
must be used to enable the station to start up.
1. Enter the user code.
If you enter an incorrect user code, the following error message is
displayed.
2. Once the correct code is entered, the station is enabled and it starts
up. The user's name is displayed:
80
ADM AREA
User number
User name
Max Mustermann
ADM AREA
User number
Max Mustermann
ENTER USER CODE
WRONG CODE
Max Mustermann
!
!
----
AirConServiceCenter