Waeco AirCon Service Center Instrucciones De Uso página 66

First start-up
6 First start-up
6.1 Setting up and switching on
1. Wheel the AirConServiceCenter to the workplace and lock the front
wheels (10).
During operation, the device must be on a level, flat surface so that
measurements can be made correctly.
2. Connect the AirConServiceCenter to the mains.
3. To switch it on, set the main switch (22) to I.
The display (6) shows the software version number for
several seconds:
✓ The AirConServiceCenter subsequently runs a software test.
The ASC2000RPA additionally displays an instruction to inspect the
refrigerant analysis filter (see "Changing the filter for refrigerant
analysis (ASC2000RPA only)" on page 96):
66
WAECO INTERNATIONAL
ASC 2000 SW x.xx
RPA DB x.xx
SN 000000
Software test.
Check refrigerant
analysis filter.
AirConServiceCenter