Lumie task Manual Del Usuario página 5

Out of the box
Out of the box
Touch interface
for lighting
control
•
Connect the mains power adaptor to the socket in
the base of the unit.
•
Position Task on a flat surface.
•
Plug in at the mains.
The Lumie touch interface briefly illuminates whilst the
sensor is calibrating.
Task is now ready to use.
Note: If you are using Task and the touch interface doesn't
seem to be working properly, repeat the last steps and
make sure you don't press the touch interface whilst the
sensor is calibrating.
ENG 5
Mains power
adaptor socket