Publicidad
Idiomas disponibles
Idiomas disponibles
MN009418A01-AC
Chapter 2: Charger, Pocket, and Communications Interface
Chapter 2
Charger, Pocket, and Communications
Interface
The IMPRES 2 Adaptive Charger System is a fully automated IMPRES 2 battery care system that is
equipped with the following additional features:
●
Adaptive charging to accommodate a wide variety of battery types, including IMPRES 2 and other
authentic Motorola Solutions batteries.
●
Pocket that accommodates either a stand-alone battery or a radio with an attached battery.
●
Red/Amber/Green LED indicating the charger pocket status.
●
Communications Module:
￮
Programming for charger reprogramming.
￮
Battery data upload to an IMPRES 2 Battery Fleet Management System.
●
Keypad Menu:
￮
Charger Setup.
￮
Battery Analysis.
●
Information display on Pocket 1.
●
Preparation of a stand-alone IMPRES 2 battery for a long-term storage or preparation of a stand-alone
Motorola Solutions Lithium-Ion battery for shipment. Do not leave batteries in the charger after the
preparation for Long-Term Storage or Lithium-Ion Shipment is complete.
●
Energy Efficiency Features:
￮
Compliant with the California Energy Commission appliance standards for small battery charging
systems. The charger pockets automatically sleep, then wake to respond to an action or to service a
battery in the pocket.
￮
Compliant with the European Standby Current Limits (European Charger Kit). The charger pockets
automatically turn off when there is no activity for a period of time. Pressing any Keypad button turns
these pockets back on.
●
Higher-rate IMPRES 2 Lithium-Ion battery charging.
●
Faster charging.
●
Extended battery life cycle.
Operation of a radio while it is in the charger is not recommended.
During the charging process, radio operation may result in a minimally reduced radio performance and an
extended battery charge time.
10
Publicidad
