Beurer BM 28 Manual De Instrucciones página 31

Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5% of the value shown
Measurement Max. permissible standard deviation
uncertainty according to clinical testing:
systolic 8 mmHg / diastolic 8 mmHg
Memory 4 x 30 memory spaces
Dimensions L 134 mm x W 103 mm x H 60 mm
Weight Approximately 367 g (without batteries,
with cuff)
Cuff size 22 to 42 cm
Permissible operat- +10 °C to +40 °C, <90% relative humidity,
ing conditions 800-1050 hPa ambient pressure
Permissible storage -20 °C to +55 °C, <90% relative humidity
conditions (non-condensing)
Power supply 4 x 1.5 V
Battery life For approx. 300 measurements, depend-
ing on levels of blood pressure and pump
pressure
Classification Internal supply, IP21, no AP or APG, con-
tinuous operation, application part type BF
Product life cycle to Information on the life cycle of the product
be expected can be found at beurer.com
The batch number is located on the device or in the battery com-
partment.
We reserve the right to make technical changes to improve and
develop the product.
• This device conforms with the European standard
EN 60601-1-2 (in accordance with CISPR-11, IEC 61000-3-2,
IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-7, IEC 61000-4-8,
AA batteries
31
IEC 61000-4-11) and is subject to particular precautions with
regard to electromagnetic compatibility. Please note that
portable and mobile HF communication systems may inter-
fere with this device.
• The device complies with Regulation (EU) 2017/745 of the
European Parliament and of the Council for medical devices
as well as the respective national regulations and the stand-
ard IEC 80601-2-30 (Medical electrical equipment Part 2-30
– Particular requirements for basic safety and essential per-
formance of automated non-invasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful life.
If the device is used for commercial medical purposes, the
applicable national regulations determine whether it must be
tested for accuracy by appropriate means.
Mains part
Model no. LXCP12-006060BEH
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
Output 6 V DC, 600 mA, in conjunction with Beurer
blood pressure monitors only
Manufacturer Shenzhen Iongxc power supply co., ltd.
Protection This device is double protected and has a pri-
mary-side cutout switch which disconnects the
device from the mains in case of malfunction.
Ensure that you have removed the batteries
from the battery compartment before you use
the mains part.
Polarity of the DC voltage connection
Insulated/protection class 2