Publicidad
Idiomas disponibles
Idiomas disponibles
4. Switch Cup Assembly Only
4.11
Securely reinstall the three previously removed
#8-32 x 0.3" flat head screws into the aligned holes with a
phillips screwdriver (Figure 24).
Installation of the switch cover is now complete,
skip Section 5 and proceed to Section 6.
A spare #8-32 x 0.3" flat head screw is supplied in the
parts bag, if needed.
This Section Will Instruct How to Install the Light Kit
Assembly. If Not Using the Light Kit, Skip this Entire
Section.
5.1
Locate the rubber plug from the hardware pack and install
it into the blade installation slot of the switch housing plate
NOTE: The rubber plug must be installed to prevent
by firmly pushing it into the slot (Figure 25).
water penetration of the switch housing assembly.
5.2
Remove the three pre-installed #8-32 x 0.3" flat head
screws from switch housing plate (Figure 26).
Retain the three switch housing plate screws for future
installation.
All manuals and user guides at all-guides.com
Figure 24
5. Light Kit Assembly
Figure 25
Figure 26
14
(Continued)
SWITCH
COVER
SWITCH COVER
SCREWS (3)
RUBBER PLUG
BLADE
INSTALLATION
SLOT
SWITCH HOUSING PLATE
#8-32 x 0.3" FLAT HEAD
SCREWS (3)
U.L. Model No.: CF135
x 3
Publicidad
