Publicidad
Idiomas disponibles
Idiomas disponibles
3. Ceiling Fan Assembly
3.11
BLADE/FLANGE INSTALLATION:
Mount fan blade flange to the decorative bottom surface
of
the
fan
blade
(as
#10-24 x .0.4" flange head blade screws using a Phillips
head screwdriver (Figure 11).
Repeat this procedure for the remaining four flanges and
blades.
NOTE: Be sure the plain side of the ceiling fan blade
Securely tighten the screws.
is facing up.
3.12
Place the blade/flange assembly onto the motor hub.
Rotate the switch plate viewing window to view the captive
flange screws.
Loosely attach the blade/flange assemblies to the motor
hub by securing the two captive flange screws
(Figure 12).
Make sure the screws are NOT tightened (Figure 12).
Careful not to bend the blades while positioning the fan for
final assembly.
A spare 1/4"-20 x .50" pan head shoulder flange captive
screw is supplied in the parts bag, if needed.
3.13
The blade flanges have an interlocking feature that must
be fully engaged before tightening the screw. Make sure all
the flanges are properly engaged and then tighten the
flange screws. If one of the flanges does not seat properly
on the motor hub, loosen the adjacent flange screws, re-
engage and reseat the flanges, then tighten the screws
again (Figure 13).
This completes the blade installation.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade assemblies when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
All manuals and user guides at all-guides.com
shown)
using
three
9
(Continued)
PLAIN SIDE OF
FAN BLADE
Figure 11
BLADE/FLANGE CAPTIVE
MOTOR
SCREWS (2 per flange)
HUB
Figure 12
Figure 13
Please contact 1-800-654-3545 for further assistance
#10-24 x 0.4" FLANGE
HEAD SCREW
(3 per flange/blade)
FAN BLADE
FLANGE
BLADE/FLANGE
ASSEMBLIES (5)
emersonfans.com
U.L. Model No.: CF135
Publicidad
