Publicidad
Idiomas disponibles
Idiomas disponibles
5. Light Kit Assembly
5.3
Light Kit Fitter Has to be Attached to the Switch Cover
to Proceed.
Position the light kit assembly near the switch housing
plate.
Align and engage the large white light kit electrical
connector with the large white motor electrical connector.
The two connectors are keyed and color-coded and must
be mated correctly (color-to-color) before they can be
correctly engaged (Figure 27).
Make sure the connector latch closes to properly lock both
pieces together.
5.4
Carefully tuck all wires and connectors into the light kit
assembly and carefully install it onto the motor housing
assembly (Figure 28).
Spin the light kit assembly to align the three holes with the
switch housing plate threaded holes.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the switch housing/light kit assembly and the
switch housing plate.
5.5
Securely reinstall the three previously removed
#8-32 x 0.3" flat head screws into the aligned holes with a
phillips screwdriver (Figure 29).
A spare #8-32 x 0.3" flat head screw is supplied in the
parts bag, if needed.
Installation of the light kit assembly is now complete, glass
shade will be installed after ceiling fan is hung on ceiling.
All manuals and user guides at all-guides.com
Figure 27
Figure 28
Figure 29
15
(Continued)
LIGHT KIT ASSEMBLY
ALIGN THE THREE
HOLES
#8-32 x 0.3" FLAT
HEAD SCREWS (3)
Please contact 1-800-654-3545 for further assistance
LIGHT KIT
ASSEMBLY
x 3
LIGHT KIT
ASSEMBLY
emersonfans.com
U.L. Model No.: CF135
Publicidad
