Emerson CALLITO COVE CF135DBZ00 Manual Del Propietário página 8

3. Ceiling Fan Assembly
3.9
The fan comes with black, blue and white leads that are
80-inches long.
Measure up approximately 6 to 9-inches above top of
hanger ball/4.5" downrod assembly (Figure 9).
Cut off excess leads and strip back insulation 1/2-inch from
end of leads using wire strippers.
3.10
Carefully flip the partially assembled ceiling fan and
position the it on the carton styrofoam (Figure 10).
Position the fan so that the bottom of the motor is
facing up.
Remove and discard the five rubber shipping spacers and
spacer screws using a Phillips head screw driver. The motor
hub must be able to move and free from the rubber spacers
before you install the blade assemblies (Figure 10).
All manuals and user guides at all-guides.com
1/2-inch
Figure 9
Figure 10
8
(Continued)
6 to 9-inches
SHIPPING
SPACERS (5)
U.L. Model No.: CF135
MOTOR
HUB