Pommier EXPAND Guía Para El Usuario página 15

Tightening torque table:
Screw grade
8.8
Ma (Nm)
10.9
µ=0.14
12.9
Tightening torque tolerance in accordance with standard NFE 25-030 Precision category C20 ±20%
When the tightening torque has been checked, mark with a ball-point metal marker
• Operating temperature: -35°C / +90°C
• ATEX: The "underrun bar" equipment does not have ATEX certification
3) Instructions for use
• Before using the vehicle on the road, the underrun bar must be placed in the unfolded position
in order to comply with Regulation R58-02.
•
Before raising the tipper trailer or backing up to the finisher, always remember to fold up the underrun
bar in order to prevent interference and damage to the equipment.
M8 x 1.25 M8 x1.25
Thin nut Nylstop nut
14 25
36
Tightening torque,
M12 x1.75 M14 x2
85 135
125 200
235
(Table 2)
Dimension to be verified in
accordance with the bar
installation instructions
P (
max. 550
Unladen
M33 x3.5
M16 x2
400
210
310
refer to bar instruction manual)
15/66