Pommier EXPAND Guía Para El Usuario página 17

Proceed in the same way on the other side.
-
•
Hydraulic Version
- Prior to any use, check the general condition of your equipment (no leaks, no deterioration of or damage
to hoses), never start up a suspect or faulty machine.
- Before and during any handling of the bar, the operator must make sure there are no people in the bar
movement areas and no objects obstructing the bar movements.
Hydraulic controls must be used for the underrun bar only: these components are designed and intended
-
to control the underrun bar only.
- Starting up:
. All operational controls are performed with the vehicle in neutral.
. To control the bar, operate the hydraulic pump and comply with instructions for use.
Operate the bar folding control (site position), until the bar is in position, ensure that the orange indicator
light is on (with the red indicator light also being on).
If the relevant option has been installed, an intermittent audible signal sounds in the bar's movement
zone when the control is operated.
17/66