Pommier EXPAND Guía Para El Usuario página 19

• Hydraulic Version
- Prior to any use, check the general condition of your equipment (no leaks, no deterioration of or damage to
hoses), never start up a suspect or faulty machine.
- Before and during any handling of the bar, the operator must make sure there are no people in the bar
movement areas and no objects obstructing the bar movements.
- Starting up:
. All operational controls are performed with the vehicle in neutral and stationary.
. To operate the bar, start up the hydraulic pump and follow these instructions.
Operate the bar deployment folding control (driving position) until the bar is in position, ensure that the red
and orange indicator lights are off.
If the relevant option has been installed, an intermittent audible signal sounds in the bar's movement zone
when the control is operated.
IMPORTANT
If you need to leave your position, disengage the power grip (stop the pump) in order prevent the risk of
operation by a third party and any risk of an accident.
19/66