Publicidad
Idiomas disponibles
Idiomas disponibles
EM Service Manual
3.2.3 How to clean the condenser and how often do
you need to clean it?
• If you have an air condenser: It is cleaned with compressed air
in the reverse direction of the condenser air circulation:
1.Remove the rear panel.
2. Blow compressed air from outside the unit.
3. Place the panel.
• If it has a water condenser: It is cleaned with a scale remover
chemical that does not damage copper, since the ductwork is
made of this material and in case the chemical damages the
ductwork, catastrophic damage to the equipment would be cau-
sed.
The cleaning frequency in both condensers is
minimum 2 times a year. The air condenser is cleaned every time
it is needed due to external conditions, that is, if there is a lot of
dust in the environment where the machine is located.
3.2.4 Water valve
The setting of the water valve on which all machines are programmed. Is
the gray valve handle always programmed to the same setting?
This valve is adjusted at the time of assembly and is left programmed right where the water is
released, this point is between the number 2 - 3
70
If cleaning of the condenser is required, the
valve opens to number 1. When cleaning is
finished, it returns to its original point (2-3).
www.emerymark.com
Publicidad
