Siemens SIMATIC ET 200AL Manual De Sistema página 908

Códigos de error de la OPC Foundation
Códigos de error
La tabla siguiente contiene los códigos de error de la OPC Foundation.
Los nombres y las explicaciones de los errores se muestran en su versión original. Solo
están disponibles en inglés.
Códigos de error
Tabla 9- 7 Códigos de error de la OPC Foundation
Número de Nombre
error (hex)
00000000 Good
002D0000 GoodSubscriptionTransfe-
rred
002E0000 GoodCompletesAsynchro-
nously
002F0000 GoodOverload
00300000 GoodClamped
00960000 GoodLocalOverride
00A20000 GoodEntryInserted
00A30000 GoodEntryReplaced
00A50000 GoodNoData
00A60000 GoodMoreData
00A70000 GoodCommunicationEvent
00A80000 GoodShutdownEvent
00A90000 GoodCallAgain
00AA0000 GoodNonCriticalTimeout
00BA0000 GoodResultsMayBeIncom-
plete
00D90000 GoodDataIgnored
00DC0000 GoodEdited
00DD0000 GoodPostActionFailed
00E00000 GoodDependentValueChan-
ged
Comunicación
Manual de funciones, 12/2017, A5E03735817-AF
Estado "Good" (0000_0000 - 3FFF_FFFF)
Significado
Success, no error.
The subscription was transferred to another session.
The processing will complete asynchronously.
Sampling has slowed down due to resource limitations.
The value written was accepted but was clamped.
The value has been overridden.
The data or event was successfully inserted into the historical database.
The data or event field was successfully replaced in the historical database.
No data exists for the requested time range or event filter.
The data or event field was successfully replaced in the historical database.
The communication layer has raised an event.
The system is shutting down.
The operation is not finished and needs to be called again.
A non-critical timeout occurred.
The server should have followed a reference to a node in a remote server
but did not. The result set may be incomplete.
The request pecifies fields which are not valid for the EventType or cannot
be saved by the historian.
The value does not come from the real source and has been edited by the
server.
There was an error in execution of these post-actions.
A dependent value has been changed but the change has not been applied
to the device.
9.3 Uso de la CPU S7-1500 como servidor OPC UA
Comunicación OPC UA
209