English
Owner's manual
3. SAFETY SYMBOLS
Symbols are used in this manual to attract your
attention to possible risks. The safety symbols
and the explications which accompany them
must be perfectly understood. The warning
themselves do not prevent the risks and can
not be a substitute for proper methods of
avoiding accidents.
15m (50 ft)
40:1
26
This symbol, before a safety
comment, indicates a precaution, a
warning or a danger. Ignoring this
warning can lead to an accident for
yourself or for others. To limit the risk
of injury, fire or electrocution always
apply the recommendations indicated.
Before any use, refer to the corres-
ponding paragraph in the present ma-
nual. Read the instruction handbook
and follow all warnings and safety
instructions
Keep all children, bystanders and
helpers 15 meters away from the
brush cutter
The exhaust and other parts of the
engine will get very hot during use, do
not touch
Gasoline is very flammable. Avoid
smoking or bringing any flame or
sparks near fuel
Carbon monoxide
Beware of thrown objects hit by cut-
ting attachments. Never use without
properly mounted blade guard.
Beware of foot injury by cutting
attachment
Wear head protection, hearing pro-
tection and eye protection when using
the device.
Wear robust footwear when using the
device.
Wear protective gloves when using
the device
Symbol for refueling the "MIX GASO-
LINE" on fuel tank cap
4. SAFETY PRECAUTIONS
Proper safety precautions must be observed.
Like all power equipment this unit
must be handled carefully. DO NOT EXPOSE
YOURSELF OR OTHERS TO DANGER.
Follow these general rules. Do not permit
others to use this machine unless they are
thoroughly responsible and have read, and
understand the machine manual and are
trained in its operation. This machine is not to
be operated by children.
• Always wear safety goggles for eye
protection. Dress properly, do not wear
loose clothing or jewelry that could become
caught in moving parts of the unit. Safe,
sturdy,nonskid footwear should always be
worn. Long hair should be tied back. It is
recommended that legs and feet to be
covered to protect from flying debris during
operation.
• Before using and after dropping or other
impacts, inspect the entire machine for
loose parts (nuts, bolts, screws, etc.)
and any damage. Repair or replace as
necessary.
• DO NOT USE any attachment with
this power head other than the ones
recommended by our company. Serious
injury to the operator or bystanders could
result as well as damage to the machine.
• Keep the handles free from oil and fuel.
• Always use proper handles and shoulder
strap when cutting.
• Do not smoke while mixing fuel or filling
tank.
• Do not mix fuel in an enclosed room or near
open flames. Ensure adequate ventilation.
•Always mix and store the fuel in a properly
marked container that is approved by local