Publicidad
Idiomas disponibles
Idiomas disponibles
codes and ordinances for such usage.
• Never remove the fuel tank cap while the
engine is running.
• Never start or run the engine inside a
closed room or building. Fumes from
the exhaust contain dangerous carbon
monoxide.
• Never attempt to make engine adjustments
while the unit is running and strapped to the
operator. Always make engine adjustments
with the unit resting on a flat, clear surface.
• Do not pull off the cable.
• Do not lift the machine other than by the
handle of the shaft.
• Do not rest the machine on the ground
while the engine runs (e.g.in idling).
• Regular check for damages, failing of parts,
component or cables. Do not use the unit
if it is damaged or poorly adjusted. Never
remove the machine's guard. Serious injury
to the operator or bystanders could occur
as well as damage to the machine.
• Inspect the area to be cut and remove all
debris that could become entangled in the
nylon cutting head. Also remove any objects
that the unit may throw during cutting.
• Keep children away. Onlookers should be
kept at a safe distance from the work area,
at least 15 METER (50 FEET).
• Never leave the machine unattended.
• Do not use this unit for any job other than
those for which it is intended as described
in this manual.
• Do not overreach. Keep proper footing and
balance at all times. Do not run the unit
while standing on a ladder or on any other
unstable footing location.
• Keep hands and feet clear of the nylon
cutting head while unit is in use.
Owner's manual
• Do not use this type of machine for
sweeping away debris.
• Do not use the unit when you are tired, ill or
under the influence of medication, drugs or
alcohol.
• Use nylon cutting head which is free of
damage. If a stone or any other obstacle
is hit, stop the engine and check the nylon
cutting head. A broken or unbalanced nylon
cutting head must never be used.
• Do not store in a closed area where fuel
vapors can reach an open flame from hot
water heaters, heaters, furnaces, etc. Store
in a locked, well ventilated area only.
• Ensure safe and proper performance of
your product. These part are available
from your dealer. The use of any other
accessories or attachments may cause
a potential hazard or injury to the user,
damage to the machine and void this
warranty.
• Clean the machine completely, especially,
the fuel tank, its surroundings, and the air
cleaner.
• When refueling, be sure to stop the engine
and confirm that it is cooled down. Never
refuel when the engine is running or hot.
When gasoline spills, be sure to wipe it up
completely and properly dispose of those
materials before starting the engine.
• Stay clear of other workers or bystanders by
at least 15 meters /50 feet.
• When ever approaching an operator of
the machine, carefully call his attention
and confirm that the operator stops the
engine. Be careful not to startle or distract
the operator which can cause an unsafe
situation.
• Never touch the nylon cutting head when
the engine is running. If it is necessary to
adjust the protector or nylon cutting head,
be sure to stop the engine and confirm that
English
27
27
Publicidad
