Publicidad
Idiomas disponibles
Idiomas disponibles
update.
2. Connect a USB stick to the USB connection
as shown in the illustration. (Fig. 11).
3. Switch on the main switch (7) (ON).
4. The robot lawn mower will now start updating
the software and will display the current sta-
tus.
5. Pull out the USB stick and restart the robot
lawn mower with the main switch (7).
For the new software, contact our customer
service or visit our websitehttps://www.einhell-
service.com/en_DE/page/sterwins-robot-lawn-
mower
7.2.3 Repairing the perimeter wire
If the perimeter wire (18) gets severed at any
point, use the supplied cable connectors (16) to
repair it. To do so, insert both ends of the severed
perimeter wire (18) into the cable connector (16)
and squeeze it together with the help of a pair of
pliers. Connect the power plug to the socket out-
let. Then check whether it is working properly by
checking the LED indicator (21) on the charging
station (19).
7.3 Ordering spare parts
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go
to https://www.einhell-service.com/en_DE/page/
sterwins-robot-lawn-mower
Replacement blades Art. No.: 34.140.20
Important:
For the exploded view and bill of material, please
refer to our Einhell website.
Spare parts available of this Product is 10 Years,
after the last date of purchase.
8. Storage
Fully charge up the rechargeable battery before
putting it into storage over winter and switch
off the robot lawn mower at the main switch (7)
(OFF). Take the rechargeable battery out of the
equipment. Disconnect the power supply unit (13)
Anl_ST_400_SPK7.indb 45
Anl_ST_400_SPK7.indb 45
GB
from the power supply and the charging station
(19).
The perimeter wire (18) can be left outdoors over
winter. However, make sure that the connections
are protected against corrosion. To do so, discon-
nect the connections of the perimeter wire (18)
from the charging station (19).
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30°C. Store the equipment
in its original packaging.
9. Transport
•
Switch off the equipment at the main switch
(7) (OFF). (Fig. 8).
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and tip-
ping over.
•
Carry the robot lawn mower by the carry-
handle (6) with the blade plate (11) facing
away from your body.
10. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 45 -
16.11.2023 11:32:29
16.11.2023 11:32:29
Publicidad
