Würth BLG 12/24V - 50A Traducción Del Manual De Instrucciones De Servicio Original página 32

Operating status before the start of charging
Charger on standby
Battery is missing or poles are
reversed
Charging preparation or
battery voltage < 0.25 V/cell
Operating status during charging
Exhausted battery start
Desulphation
Main charge
Boost charge
End of charge/charge retention
Pause
Support mode in operation
Support mode pre-selected
(Charger voltage-free)
Operating status in the event of an error
Temperature error
Control error
Timeout
Frequency Maintenance activity
Visually inspect the device and its surrounds for possible damage and
contamination. Clean if necessary.
Check connections to ensure they are sitting securely.
Before every
start-up
Check personal protective equipment to ensure it is functional and replace if necessary.
Check the operating environment to ensure compliance with the operating conditions.
32
< 80 % > 80 % 100 %
Flashes
Flashes
X
X
X
X
X
Support
mode
White
White
White
X
X
X
Flashes
X Red
Red
Red
Comments
Brief flashing every 4s
Permanently lit
Slow flashing
Battery voltage
> 0.25 V/cell
< 1.5 V/cell
21 h + 0.5 h + charge
End-of-charge voltage
reached
Alternating flashing
Shutdown as a result of
current consumption test
or exhausted battery start
By whom?
Operator