Steelcase Migration LTD Instrucciones De Uso página 29

Height adjustment – Memory control panel
1. Press the appropriate "Up or Down" button to
reach the desired desk height.
=
The desktop moves up or down.
2. Release the "Up or Down" button.
ü The desktop stops at the desired point. The display
indicates the desk height.
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
1. Press and hold the "Down" button.
=
The lower end position is reached.
2. Release the "Down" button.
=
The desk moves to minimum position; the reset and
initialisation process starts.
ü Reset and initialisation process is completed.
Releasing the control panel before the process is
completed will interrupt the manual resetting process
and it must be started anew.
Configuring memory positions
1. Press the "Up" or "Down" button until the desired
height is reached.
=
The display indicates the desk height (e.g. 73 cm).
2. Press the "LOGO" button.
3. Press the desired "Memory position" button (e. g.
button "2")
=
The display indicates P 2.
5 Operating and adjusting
EN
29