Steelcase Migration LTD Instrucciones De Uso página 32

5 Operating and adjusting
Synchronising the height indication
The submenu is exited if the "LOGO" button is not pressed
after 10 seconds.
Limit height adjustability - set
These settings can limit the desktop movement range (for
example if there is a rolling file cabinet under the desk or a set
of shelves above it). The stopping positions for the rolling file
cabinet become the new lowermost end position, and the
shelf stopping positions become the new uppermost end
position (menu F 4).
EN
Limit height adjustability - delete
To delete the movement range limitation of the desktop,
proceed as follows (menu F 5).
32
5. Press the "LOGO" button to confirm.
ü The correct height of the desk is now displayed.
1. Move the desktop to the lower half or the upper half
of the movement range.
2. Press and hold the "LOGO" button for 6 seconds.
=
F 1 is displayed.
3. Press the "Up" or "Down" button until F 4 is shown
on the display.
=
A display appears with one bar at the top left and
one at the bottom right.
}
Press the "Up" button to save the upper end
position or
}
the "Down" button to save the lower end position.
4. Press the "LOGO" button to confirm.
1. Press and hold the "LOGO" button for 6 seconds.