Steelcase Migration LTD Instrucciones De Uso página 30

5 Operating and adjusting
Configuring memory positions
Calling up memory positions
Calling up the menu
The comfort manual switch offers various setting options that
can be made by the operator.
EN
Menu structure:
F 1 - Change height indication (CM / INCH).
F 2 - Adjust height indication.
F 3 - Reset to factory settings.
F 4 - Shelf and container- set stop.
F 5 - Shelf and container- delete stops.
30
ü The display indicates the desk height after roughly 2
seconds.
1. Press and hold the corresponding memory position
button (e.g. button "1" or button "2").
ü The desktop is moved until the stored desktop
height is reached. The desktop movement is stopped
whenever the button is released before the memory
position has been reached.
1. Press the "LOGO" button for six seconds and then
release the button.
=
F 1 is displayed and the menu opens.
2. Navigate in the menu with the "Up" and "Down"
buttons.
3. Press the "LOGO" button again to access a
submenu.
ü The corresponding submenu opens and further
settings can be made. Please note the following
options!