Steelcase Migration LTD Instrucciones De Uso página 33

Limit height adjustability - delete
=
F 1 is displayed.
2. Press the "Up" or "Down" button until F 5 is shown
on the display.
=
A display appears with one bar at the top left and
one at the bottom right.
}
Press the "Up" button to delete the upper end
position or
}
press the "Down" button to delete the lower end
position.
3. Press the "LOGO" button to confirm.
Resetting to factory settings
1. Press the "LOGO" button for six seconds and then
release the button.
=
F 1 is displayed.
2. Press the "Up" or "Down" button until F 3 is shown
on the display.
3. Press the "LOGO" button to confirm.
=
000_ is displayed.
3. Press the "LOGO" button again to confirm.
The submenu is exited if the "LOGO" button is not pressed
after 10 seconds.
ü The desktop has now been reset to the factory
settings. C 38 is displayed.
4. Please perform a manual reset now.
5 Operating and adjusting
EN
33