Palmer supreme soaker Manual De Instrucciones página 12

USER MANUAL
5. OUT
High-impedance output path (unbalanced) for driving a (second) guitar amplifier.
RE-AMP
6.3 mm jack socket. Use a high-quality instrument cable with TS jack plugs to connect a guitar amplifier.
FX LOOP DRY/WET
Switch in position DRY: Outgoing signal without effect (No. 4. FX LOOP).
Switch in position WET: Outgoing signal with effect (No. 4. FX LOOP).
6. LINE OUT
Balanced stereo line output with XLR sockets for the left and right channels L + R. Use the LINE OUT to connect a
mixing console or audio interface, etc.
FX LOOP DRY/WET
Switch in position DRY: Outgoing signal without effect (No. 4. FX LOOP).
Switch in position WET: Outgoing signal with effect (No. 4. FX LOOP).
LIFT/GROUND
Switch for disconnecting the ground connection between the input and output (ground lift). In the non-pressed
position, the ground connection is disconnected; the connection is established when the switch is pressed. The
ability to prevent a humming loop using the ground lift switch depends on the grounding of the connected devices.
It is therefore possible that either switch position effectively reduces or eliminates humming.
15 14 8 9
7
13 12 11 10 17 16
12
EN