Palmer supreme soaker Manual De Instrucciones página 6

USER MANUAL
1. Devices can always be further improved. In the event of any discrepancies between the operating
instructions and the device labelling with regard to operating conditions, performance or other device
characteristics, the information on the device always takes precedence.
2. The device is not suitable for tropical climate zones or for operation over 2,000 m above sea level.
3. Unless explicitly stated, the device is not suitable for operation under marine conditions.
PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer, it is essential to observe the
included instructions.
CAUTION, HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use. The commercial operation of this device is subject to the
applicable national regulations and guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may generate high
sound pressure levels (SPL) that may cause hearing damage. Avoid exposure to high volumes.
CAUTION: Connecting signal cables and switching operations (e.g. switching phantom power on and
off) can lead to considerable noise. Make sure that input channels (mixing console, audio interface,
effects device, etc.) are muted during wiring and switching operations. Otherwise, noise levels may cause
damage.
WARNING: The power rating of a connected amplifier must not exceed 150 W RMS!
CAUTION: Always connect speaker cables BEFORE switching on the amplifier and Supreme Soaker and only
disconnect the cables AFTER switching off!
WARNING: To completely de-energise the Supreme Soaker, unplug the mains adapter from the socket AND
disconnect any connected amplifier from the device.
CAUTION: Make sure that the ventilation openings in the housing of the device are not covered during
operation and that air can circulate freely, especially when rack-mounted!
NOTE: Strong magnetic fields can cause humming. Therefore, do not position the Supreme Soaker in the
vicinity of strong magnetic fields (e.g. mains transformer).
NOTES FOR PORTABLE INDOOR DEVICES:
1. Temporary operation! Event equipment is generally only designed for temporary operation.
2. Continuous operation or permanent installation can impair the functioning of the device and cause
premature ageing.
EN
6