Cameo PIXBAR G2 SMD Manual De Usuario página 15

The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate
DMX delay channel of the corresponding DMX mode (0.0 s to 2.0 s in 0.1 s increments).
Setup example:
STAND-ALONE MENU MASTER / ALONE
In the stand-alone operating modes Direct LED and Play Scene/Loop, the control signal of the
corresponding operating mode can be output to slave units via XLR (DMX OUT) and W-DMX™:
Stand Alone -> Master/Alone -> Master
If the output of the control signal is not desired, the output can be deactivated:
Stand Alone -> Master/Alone -> Alone
A delay can be set for slave units for the time-delayed output of the control signal of the Play Loop
stand-alone operating mode.
Starting from the main display, press MENU to enter the main menu. Now select the Stand Alone
menu item, confirm, select Master/Alone and confirm again.
15