Cameo PIXBAR G2 SMD Manual De Usuario página 19

Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby
several spotlights can be assigned to one group. The group number is also the factor by which the
delay time set in the master unit is multiplied.
Setup example:
SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Settings and confirm with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
SYSTEM SETTINGS (Settings)
=
Set slave group for signal delay
Activate W-DMX module
W-DMX module
deactivate
Disconnect all connec-
tions and place in pairing
standby mode
Activate W-DMX
W-DMX deactivated
W-DMX mode: Receiver
G3 (G3 transmission standard)
G4s (transmission standard G4s )
Uncouple all units and make them ready for
coupling
19